Hitachi Compute Blade Series Update Manual page 78

4. The <Before> section shows the old LP firmware version. The <After> section shows
the new firmware version.
<< Update LP
No. Version
1 VV-RR(TT-KK)
<Before>
Bank# Version
0 VV-RR(TT-KK)
1 VV-RR(TT-KK)
<After >
Bank# Version
0 VV-RR(TT-KK)
1 VV-RR(TT-KK)
5. If the firmware update is version upgrade, a prompt for entering LPAR manager
Version Upgrade License Key appears as shown below. Prepare the LPAR manager
Version Upgrade License Key CD for automatic input or prepare any other form of the
LPAR manager Version Upgrade License Key for manual input. (Applicable to
version upgrade only)
Version Upgrade License Key is not needed when using LP Firmware version 59-
3x/79-3x or later.
Option 1 to utilize automatic input of LPAR manager Version Upgrade License Key
a. Press the Enter key in blank.
Enter Verup License Key :_
b. Change the CD in CD/DVD drive to LPAR manager Version Upgrade License
Key CD created in Section "Prerequisites" of Chapter 1 and press Enter key.
Exchange for CD with Verup License Key.
Ready[Enter]:_
c. Change the CD in CD/DVD drive to LP firmware CD and press Enter key.
Exchange for CD with LP Maintenance Tool.
Ready[Enter]:_
4-6 Static Version Upgrade/Revision Update by LP Maintenance Tool
Hitachi Compute Blade Logical partitioning manager Version Upgrade / Revision Update Guide
Firmware >>
Select
Active
Alternate
Select
Alternate
Active
Enter
Enter
Enter