Table of Contents
Advertisement
Parameter
For some long distance calls
6 - EPT mode
(satellite), the on-line echo may
disturb the call.
Choice between transmission
7 - COM. display
speed displayed or number of the
page in progress.
8 - Eco energy
Choosing the printer standby
delay: the printer will switch to
standby after a delay (in minutes)
of NON-operation or during the
period of time of your choice.
Note: you can also access this
parameter by pressing the
10 - RX header
If this parameter is on, all
documents received by your fax
will include the subscriber's header
with his/her name, number (if
available) fax print date and the
page number.
11 - RX speed
Transmission speed for incoming
documents.
For a quality telephone line
(compatible, no echo),
communications occur at
maximum speed.
However, it may be necessary to
restrict the transmission speed for
some calls.
12 - Rings
Number of rings to automatically
start your machine.
13 - Discard size
The Discard Size parameter only
defines the printing of received
faxes. The number of lines of a
document can be too high for the
printing paper format. This
parameter defines the threshold
beyond which the extra lines are
printed on a second page. Below
this threshold, extras lines are
deleted.
If you choose ON, the threshold is
set on 3 centimeters.
If you choose OFF, the threshold is
set on 1 centimeter.
20 - E.C.M.
This parameter helps correct the
calls made on disturbed telephone
lines. It is used when the lines are
weak or too noisy. Transmission
times may be longer.
Signification
key from the idle screen.
Parameter
This parameter lets you choose
25 - TEL Impedance
between a complex impedance
and a 600 Ohm impedance,
depending on the telephone
network your terminal is connected
to.
73 - Improve rep @
This parameter lets you
automatically register the Internet
address of your subscribers fax
during a call (if available).
When the fax machine receives an
74 - Erase mailbox
e-mail with an attachment and
cannot open it, it erases the
message from the ISP MBX, prints
and transmits with a notice of
uncomprehension to the message
sender.
At E-mail reception, the fax does
not destroy the MBX message, it
prints a notice of uncomprehension
asking you to recuperate this
message with your computer
equipment.
This parameter is useful only if you
have PC equipment. The memory
capacity is limited, you need to
empty your MBX or else new
messages may not be received.
75 - Text Attchmt.
Editing ON / OFF and printing the
received Internet documents.
Default format of document sent
76 - Attchmt. form
on the Internet:
PDF : monochrome or colour
IMAGE : monochrome (TIFF) or
colour (JPEG)
77 - LAN speed
To define the communication
speed of the peripheral units in
relation to the implemented Local
Area Network (LAN).
Makes printing lighter to save toner
80 - Toner save
cartridge ink.
81 - Font number
Starts the printing of the log list.
This parameter lets you set the
default PCL font. The possible
values are included between 5 and
128 included. The default value is
0 (Courier).
- 37 -
LFF6080
Signification
Advertisement
Table of Contents
