Operation; Device Management; Adding Des Devices - ABB D0401 Product Manual

9

Operation

9.1

Device management

9.1.1

Adding DES devices

Note
Only a device without a certificate can be added by SmartAP. This device will
lose its certificate if its physical address is changed.
All the devices need to be powered on before being added.
There are 3 methods to add a DES devices to SmartAP.
Method 1: Search the devices automatically
Note
All the devices need to be set to the physical address locally before being
added.
On the configuration screen, click "Door entry system", then click "
devices in the same network.
If the device has already been signed by this SmartAP, it will not be signed again.
If the device has already been signed by other SmartAP, it will not be signed and "Sign failed"
will be displayed on the "Abnormal devices" screen. Please see the " Abnormal devices"
chapter for more details.
Product manual 2TMD041800D0088
Operation
", "√" to search all
│61