Access Smartap Through Ap Mode - ABB D0401 Product Manual

8.2.2

Access SmartAP through AP mode

SmartAP works in AP mode
■ SmartAP enters AP mode automatically when it is powered on for the first time and LED
light white.
SmartAP enters AP mode automatically after initial setup and LED flashes red.
■
■ Press AP mode switch will switch on/off AP mode, LED flashes red if SmartAP works in AP
mode.
Access SmartAP on website
On PC, open the network setting, click the designated WLAN name, and enter the password.
You can use the original password before initial setup.
You need to use a new password after initial setup.
Product manual 2TMD041800D0088
L ED
Commissioning
AP mo d e sw i tch
│17