Establishing The Connection To User Interface Of The System Access Point - ABB -free@home SAP/S.3 Product Manual

7.3

Establishing the connection to user interface of the System Access Point

Use one of the following options to open the user interface of the System Access Point:
Option A: Establishing the connection with smartphone or tablet
1. Install the free free@home app for Android or iOS.
2. Energize the System Access Point. Ensure that the access point mode has been activated
(LED button lights up blue). If not, press the access point button to activate it.
3. Connect the terminal device with the WLAN of the System Access Point (SSID:
SysAPXXXX).
Enter the password (see text on the rear side of the System Access Point).
Network settings
1
Access Point Mode
2
SSID: SysAP_XXXX
3
PW: XXXXXXXXX
4 IP: 192.168.2.1
Fig. 14: Text on the interior side of the System Access
Point
4. Start the app.
5. The app establishes a connection to the System Access Point automatically.
Product manual 2CKA001473B9726
Commissioning
01 - Access point mode
02 - WLAN password (SSID)
03 - Password
04 - IP Device address
│28