Electrical Connection - ABB -free@home SAP/S.3 Product Manual

6.5

Electrical connection

Cat5 or Cat6 wires are connected directly via the Ethernet port.
■
IMPORTANT: Use only shielded Cat5 or 6 wires.
For installations with a plug-in connection, the socket outlet must be mounted close to the
■
SysAP and be easy to access.
Fig. 10: Connecting the power adapter
All other devices on the network (free@home wired bus) must be powered by a separate
■
NEC Class 2 (LPS) power supply.
Hinweis
When operating more than 64 devices, a second power supply must be used.
Product manual 2CKA001473B9726
Connection, installation / mounting
Use the enclosed power supply with the
correct adapter to power the SysAP.
1. To connect the adapter to the power
supply, simply slide it down the rails
on the power supply until it locks in
place (the figure of the adapter
serves as an example).
│21