Update - ABB -free@home SAP/S.3 Product Manual

8

Update

A firmware update is carried out via the Web-based user interface of the System Access Point.
A firmware update is carried out via the device settings of the Web-based user in-terface of the
System Access Point.
Fig. 30: Firmware update
Upload firmware
A firmware update of the System Access Point and the free@home devices is carried out by
pressing button "Upload firmware". The update file contains both the updates of the System
Access Point as well as the updates for all system de-vices. The update consists of four steps:
[1] Upload of the firmware to the System Access Point - takes place automatically after the
update file has been selected.
[2] Processing the firmware - takes place automatically after the successful update. The
process can take a few minutes.
[3] Installing the firmware - takes place after confirming the update dialogue. The update takes
a few minutes. After the update has been carried out suc-cessfully, the System Access
Point restarts. This could lead to the website in the Internet browser continuing to indicate
an ongoing update process. An update of the website (F5 key) rectifies the problem.
[4] Firmware update of all free@home devices connected to the bus - after confirming the
update dialogue all free@home devices connected to the bus are updated automatically.
The update is always carried out simultane-ously on two devices and can be recognized by
the mutual flashing of the LEDs. The process takes approximately 2 minutes for each
device. The system can be operated as usual during the update.
Product manual 2CKA001473B9726
Update
│50