KX-CLPF1
2.2.
Feeder Board
Before handling, remove the Left Cover (see Section 1.1).
(1)
Disconnect the 5 connectors from the Feeder Board.
(2)
Remove the 3 screws (A).
(3)
Remove the Feeder Board with shield cover.
(4)
Remove the screw (B).
(5)
Remove the Feeder Board.
2.3.
Paper Size Switch
Before handling, remove the Left Cover (see Section 1.1).
(1)
Disconnect the connector CN5 from the Feeder Board.
(2)
Remove the 3 screws.
(3)
Remove the Feeder Board Unit.
(4)
Remove the Paper Size Switch by releasing the hooks of
the Paper Size Switch.
8