Part Names And Functions - Epson MOVERIO Pro BT-2200 User Manual

Part Names and Functions

Headset (BT-2200)
Camera
A
Captures images and movies. Remove the protective film before
use. You can adjust the angle of the camera.
Camera indicator
B
Flashes while the camera is operating.
Light sensor
C
Senses the brightness of your surroundings and automatically
adjusts the brightness of the screen.
Head pad
D
Fits against your forehead when wearing the headset. The head
pad is equipped with a built-in sensor to detect the position
and direction of the product.
Lens
E
Displays images. When not displaying images, you can slide up
the lens to the head pad.
Lens justifier
F
You can adjust the position of the lens vertically. Adjust the
left and right by the same amount so that the lens is not tilted
during adjustment.
12
Rubber band
G
Secures the headset to your helmet.
➡ "Replacing the Rubber Band (BT-2200)" p. 14
Helmet holder
H
Use the four helmet holders to make sure the headset does not
come off during use.
This also secures cables when wearing the headset.
Adjuster
I
Adjusts the length of the rubber band according to the size of
the helmet.
Band holder
J
Route the band through each of these when replacing the
rubber band.
Inner pad
K
Sticks to the front of the helmet.
Screw holes to secure the shade/protective shield/
L
lens holder
Install the shade/protective shield using the exterior screw
holes. Install the lens holder using the interior screw holes.
➡ "Installing the Shade/Protective Shield/Lens Holder"
p. 7