Table of Contents
Advertisement
Wearing the Product
Warning Product usage precautions
• Before operating this product, make sure it can be worn according to the procedures in "Wearing the Controller" p. 9 as well as on this page and the fol-
lowing pages.
• As much as possible, make sure that the cables are secured to your body and do not sag or droop. If the cables come loose, they could get caught
or entangled in something and cause an accident or injury.
1. Wearing the controller
➡ "Wearing the Controller" p. 9
2. Turning on
➡ "Turning On and Off" p. 8
Check that the power indicator on the product is light blue (turned
on).
3. Wearing the headset
Caution
When the lens is lowered, your field of vision is narrowed even when
nothing is displayed. When not viewing images, make sure you slide up
the lens for your own safety.
Note
The headset can be worn over glasses that are up to 143 mm wide.
A
Move the lens as far away from the head pad as pos-
sible.
Note
When wearing the headset over a cap, remove the cap and fit it
into the headset.
• You may not be able to attach this product to helmets with
large brims. Also, if the brim of the helmet sticks out too far, it
may interfere with the camera image. The recommended brim
length is 40 mm or less.
• Match the size of the cap with your head in advance.
• Place the head pad on the brim of the cap.
• Adjust the length of the head band according to the size of the
cap.
B
Run the cable through the cable securing section of
the headset.
17
Advertisement
Table of Contents
