Related Manuals for NEC DTZ-8R-1
Summary of Contents for NEC DTZ-8R-1
- Page 1 How can I adjust transmit and receive volume in the DTZ-8R-1? Press the Mute/Menu key followed by 1, 2, 3, # on the numeric keypad...
- Page 2 When you see Service Menu in the display of the DTZ-8R-1, press the Down arrow until you see Audio Gain Offset Service Menu >HS Version BU Version Clear Setting Audio Equalizer Speed Dial When you see the arrow to the left of Audio Gain Offset, press the Select button...
- Page 3 The default setting for Transmit and Receive Gain is 0 Audio Gain Offset >TX 0 RX 0 To modify the TX Gain, press the Up or Down Arrow to reach the desired level (+6, +4, +2, -2, -4, or -6) Note –...
- Page 4 Audio Gain Offset TX -6 RX 4 To modify the RX Gain, press the Up or Down Arrow to reach the desired level (+6, +4, +2, -2, -4, or -6) Audio Gain Offset TX -6 RX 4 After you assign the desired TX and RX Gain, press the Select/Enter button...
- Page 5 Audio Gain Offset TX -6 RX 4 Back Press the button under the word “Back” until you see the Home Screen. Make test calls. Continue to modify as needed.