Using The Minute Minder Timer - Kenwood KDGC66S19 Installation Instructions Manual

Using the Minute Minder Timer

Your cooker has a minute minder that can be used as a kitchen timer. Set an amount of time and the timer will
start to count down from your desired time, an alarm will sound once the time has expired. This will not turn your
cooker off, it's only a timer. To set the minute minder you'll need to unlock the display, press and hold the MODE
button for 2 seconds.
Press the MODE button until you see the
1.
and the time 0:00 will be displayed .
2. While the
at a time, or keep your finger pressed on the '+' button to quickly
increase the time. You can also press the '-' button to decrease the
amount of time.
3. When you have set your desired time wait for a few seconds, the
symbol will stop flashing and the current time will be displayed.
4. If you want to see the time remaining at any point unlock the
display then press the MODE button and you'll see the time
counting down.
5. Once the timer has counted down to 0:00 your cooker will beep and
the symbol will flash. To switch off the beeping alarm press either
the + or - buttons. The
unlock the display.
The alarm will sound for approximately 7 minutes before
automatically switching off if the display is not touched.
18
Kenwood Free Standing Dual Fuel Double Oven KDGC66S19 Manual.indd 18
symbol is flashing press the '+' button to add a minute
symbol will continue to flash until you
symbol begin to flash
27/01/2020 11:12