Replacing The Oven Lamp; Hints And Tips - Kenwood KDGC66S19 Installation Instructions Manual

Replacing the Oven Lamp

Let the oven cavity cool down.
Ensure that the cooker is switched off before replacing the lamp to avoid the possibility of an electric
shock.
• Remove the protective cover.
• Unscrew and replace the bulb with a new one suitable for high
temperatures (300°C).
• Refit the protective cover.
Bulb specifications
230V~ 50 Hz, 25W, E14

Hints and Tips

Problem
My hob burner
does not light
My burner flames
are yellow or hard
to start
One of my burners
has an uneven
flame.
30
Kenwood Free Standing Dual Fuel Double Oven KDGC66S19 Manual.indd 30
Possible Causes
• No power.
• Dirty ignitors.
• Burners not seated properly.
• The burner parts may not be
located properly.
• Gas running low.
• Dirty burners
• Low gas pressure
• Burners may not be seated
properly or dirty.
What To Do
• Check the cooker is switched on.
• Check the control is pushed in and turned on
and the supply to the house is working. You
should hear the gas when you turn a burner on.
• The ignitors may be dirty. Clean them gently
with a small nylon brush such as
a toothbrush.
• The burner parts may not be located properly.
Check the assembly and make sure the burner
cap is sitting flat.
• Check the assembly and make sure the burner
cap is sitting flat.
• If you use bottled gas this may indicate you are
getting near the end of the bottle.
• Check the burner parts are clean and dry.
• The gas pressure may not be at the correct level.
• Check with your approved service agent.
• Your cooker may not be set up for the gas you
are using. Check this with your approved service
agent.
• Check the burner parts are clean and dry. Check
the assembly and make sure the burner cap is
sitting flat.
Oven Lamp
27/01/2020 11:12