Using The Cooking Timer - Kenwood KDGC66S19 Installation Instructions Manual

Using the Cooking Timer

Your cooker has a cooking timer that can be used as a timer that will automatically switch your oven off when
the time has expired. Switch your oven to your desired cooking temperature, place your food in the oven and set
the Cooking Timer. The timer will start to count down from your desired time and an alarm will sound once the
time has expired, your oven will also automatically switch off. To set the cooking timer you'll need to unlock the
display, press and hold the MODE button for 2 seconds.
Feature only available with the main oven.
Press the MODE button until you see the word END and the current
1.
time alternating in the display the
2. Press the '+' button to set the time you would like you cooker to
switch off.
You can set a time up to 10 hours after the current time.
3. When you have set your cooking finish time wait for a few seconds,
the symbol will stop flashing and the current time will be
displayed. Remember your desired cooking temperature will need
to be set at this point.
4. Once the time has reached your End time your cooker will switch off
and it will beep, the
alarm press either the + or - buttons. The
in the display.
The alarm will sound for approximately 7 minutes before
automatically switching off, if the display is not touched.
5. Remember to turn your cooker control back to 0 to fully switch off
your cooker.
Kenwood Free Standing Dual Fuel Double Oven KDGC66S19 Manual.indd 19
symbol will begin to flash.
symbol will flash. To switch off the beeping
symbol remain flashing
19
27/01/2020 11:12