Siemens SINUMERIK 840D sl Programming Manual page 993

<ADDRESS>:
<COMMAND>:
<FILE>:
<DIALOG>:
Parameters within the acknowledgment string:
<QUIT>:
NC programming
Programming Manual, 12/2019, 6FC5398-2EP40-0BA0
Operating area in which the configured user dialog boxes are implemented
Function
"Run MyScreens" user dialog
"Easy XML" user dialog
User XML
Pop-up window "Run MyScreens"
Popup window "Easy XML"
Command to be executed
Function
"Run MyScreens" user dialog
"Easy XML" user dialog
User XML
Pop-up window "Run MyScreens"
Popup window "Easy XML"
Name of the file in which the dialog to be displayed is programmed
Function
"Run MyScreens" user dialog
"Easy XML" user dialog
User XML
Pop-up window "Run MyScreens"
Popup window "Easy XML"
Popup window "Easy XML" with configura‐
tion direct in the NC program (see example
2)
Name of the dialog to be displayed
Function
All functions except popup window "Easy
XML" with configuration direct in the NC
program
Popup window "Easy XML" with configura‐
tion direct in the NC program (see example
3)
Acknowledgment type
No acknowledgment.
N:
Program execution is continued after the command has been
sent. There is no feedback if the command could not be success‐
fully executed.
Note
Acknowledgement type "N" must be used if a display time (dwell
time) is programmed in the NC program (see Example 2 below)
Asynchronous acknowledgment
A:
The program execution is continued after the command is issued.
The return value is saved in a user-specific acknowledgement
variable (GUD variable), which is defined within the scope of the
dialog configuration, and can be read in the NC program.
Work preparation
3.23 Additional functions
Operating areas
CYCLES
CYCLES
XML
POPUPDLG
POPUPDLG
Commands
PICTURE_ON, PICTURE_OFF
PICTURE_ON, PICTURE_OFF
XML_ON, XML_OFF
PICTURE_ON, PICTURE_OFF
PICTURE_ON, PICTURE_OFF
Files
<name>.com
<name>.xml
<name>.xml
<name>.com
<name>.xml
xmldial_emb.xml
Dialog name
Name of the dialog configured
in the <FILE> file
main
993