D-Link DIR-615 User Manual page 120

DIR-615 Wireless N300 Router
User Manual
You can specify the following parameters:
Parameter
SSID
MAC address
Hostname
Enable
When you have configured the parameters, click the SAVE button.
To edit the parameters of the existing rule, in the Filters section, left-click the needed rule. In the
opened window, change the settings and click the SAVE button.
To remove the rule from the page, in the Filters section, select the checkbox located to the left of
the relevant rule and click the DELETE button (
After creating the rules you need to configure the filtering modes.
To open the basic or additional wireless network for the devices which MAC addresses are
specified on this page and to close the wireless network for all other devices, left-click the line of
the wireless network. In the opened window, move the Enable MAC filter switch to the right.
Select the Allow value from the MAC filter restrict mode drop-down list and click the SAVE
button.
To close the wireless network for the devices which MAC addresses are specified on this page,
select the Deny value from the MAC filter restrict mode drop-down list and click the SAVE
button.
A wireless network to which the rule will be applied. Select the
needed value from the drop-down list.
In the field, enter the MAC address of the device to which the
selected filtering mode will be applied.
The name of the device for easier identification (optional). You can
specify any name.
If the switch is moved to the right, the rule is active.
Move the switch to the left to disable the rule.
).
Page 120 of 163
Configuring via Web-based Interface
Description