D-Link DIR-615 User Manual page 65

DIR-615 Wireless N300 Router
User Manual
Parameter
Isolate connection
When all needed settings are configured, click the APPLY button.
After clicking the button, the window for creating an additional connection opens.
If your ISP offers access to local services (e.g. audio and video resources), select the existing
connection or select the create a new connection choice of the radio button. Then click the OK
button. On the page displayed, specify the parameters for the connection of the Dynamic IPv4 or
Static IPv4 type and click the APPLY button. Click the BACK button to specify other settings for
the connection of the PPPoE type.
If you do not need to create an additional connection, click the SKIP button. In this case, the
Settings / Internet / WAN page opens.
If the switch is moved to the right, the router uses an alternate
routing table for this connection. Enable this function only when
your ISP requires this.
Page 65 of 163
Configuring via Web-based Interface
Description