Ports Settings - D-Link DIR-615 User Manual

DIR-615 Wireless N300 Router
User Manual

Ports Settings

On the Functions / Advanced / Ports Settings page, you can configure or disable
autonegotiation of speed and duplex mode or manually configure speed and duplex mode for each
Ethernet port of the router.
Also you can enable or disable data flow control in the autonegotiation mode. This function is used
for equal load balancing in ISPs' networks. Contact your ISP to clarify if this function needs to be
enabled.
Figure 115. The Functions / Advanced / Ports Settings page.
On order to configure autonegotiation or configure speed and duplex mode manually for an
Ethernet port, select it in the table.
!
Autonegotiation should be enabled for both devices connected to each other.
!
When autonegotiation is disabled, speed and duplex mode settings for both devices
connected to each other should be the same.
Page 134 of 163
Configuring via Web-based Interface