Clearing Paired Devices - Silvercrest SBK 40 A1 Operation And Safety Notes

communication device (mobile phone or computer) is discon-
nected.
Now connect to the second communication device via Blue-
tooth with the headphones. Please refer to the notes in the
®
instructions for your communication device. Select the entry
"SBK 40 A1" from the list of devices detected by your com-
puter or mobile. The second communication device is connected.
Briefly press button and acoustic signal sounds. The first
8
communication device is connected again. Now, both commu-
nication devices are connected to the headphones simultane-
ously.

Clearing paired devices

In paired mode (the LED will briefly flash blue twice every
4
3 seconds), press and hold button for 3 seconds and
8
acoustic signal sounds.
The headphones is now in pairing mode. The LED flashes
4
red and blue.
Simultaneously pressing and holding button and
8
button for approx. 2 seconds and two beeps sound.
2
20 GB/IE/NI