Toshiba Uninterruptible Power System(UPS) G9 Series Brochure & Specs page 5

Model Range
Voltage Rating
Input Voltage Tolerance
Voltage Regulation
PWM Carrier Frequency
Control System
V/f Pattern
Overload Current Rating
Frequency Setting
Frequency Precision
Output Frequency Range
Speed Regulation
Discrete Input Terminals
Analog Inputs
Discrete Output Contacts
Analog Outputs
Control Board Communication Ports
Power Terminals
PID (Set Point Control)
Retry
Restart
Ambient
Installation
LCD EOI (Liquid Crystal Display/
Electronic Operator Interface)
LED EOI
LED Indicators
Keys
Rotary Encoder
Monitoring
Selectable Display Units
EOI Communications Ports
230 V 0.75 to 2 HP 3 to 5 HP 7.5 HP
460 V 1 to 3 HP 5 HP 7.5 to 10 HP
Height
11.2 12.4 15
(in.)
Width
5.2 6.1 6.9
(in.)
Depth
6.1 6.6 6.6
(in.)
G9 Drive
G9 Specifications
1 to 150 HP
200 to 240 V
±10%
Main Circuit Voltage Feedback Control (Automatic Regulation, 'Fixed' and 'Control Off' Selections)
Adjustable 0.5 to 15 kHz (ASD Specific, Consult Factory)
Sine Wave PWM System - Flux field current vector control
Open Loop Vector, Closed Loop Vector, Constant Torque, Variable Torque, Auto Torque Boost, Manual Torque Boost,
5-Point V/f Custom Curve Setting
115% Continuous, 150% for Two Minutes up to 100 HP, Consult Factory for Ratings Above 100 HP
Rotary Encoder Integrated into EOI, 0 to 10 V, ±10 V, 4 to 20 mA, Binary Input, Motorized Potentiometer Input
Analog Input ±0.2% of the Maximum Output Frequency, Digital Input ±0.01% of the Maximum Output Frequency
0 to 299 Hz
Closed Loop (Up to 0.01%, 1000:1 Speed Range), Open Loop (Up to 0.1%, 60:1 Speed Range)
Eight Discrete Input Terminals Programmable to 67 Functions; Number of Terminals may be Increased Using Optional
Hardware
One 4 to 20 mA, One 0 to 10 V, and One ±10 V
Three Output Contacts Programmable to 127 Functions
One Programmable 4 to 20 mA or 0 to 10 V and One 4 to 20 mA Output
2-Wire/4-Wire RS485
Input (L1, L2, L3); Output (T1, T2, T3); DCL(PO,PA); DBR (PA,PB); DC BUS (PA, PC)
Proportional Gain, Integral Gain, Feedback Settings Upper/Lower Deviation Limits, Feedback Source Delay Filter,
Feedback Settings Differential Gain
ASD can clear some faults upon trip automatically.
ASD will catch a coasting motor smoothly.
Operating Temperature: -10 to +40°C; 14 to 104°F Humidity: 95% Non-Condensing
NEMA 1 Enclosure Type
Electronic Operation Interface (EOI)
Full English Back-Lit Display
Light Emitting Diode; Seven Segment Display
Run (Red)/Stop (Green), Local/Remote (Green), DC Bus Charge Indicator (Red)
Local/Remote, ESC, Run, Mode, Stop/Reset
Encoder with Integrated Enter Key for Frequency and Parameter Adjustments
Main Display Shows Two Monitored Items or can Display up to 17 User-Selected Scrolling Items Including: Output
Frequency, Output Current, Output Voltage, Input Power, Output Power, Motor Overload Ratio, DC Bus Voltage,
Compensation Frequency, PID Feedback, AM Output, FM Output, Motor Load, ASD Load, Run Time
Completely Configurable along with Scaling Factor Multiple; Current Display Selectable Between Amps or %; Voltage
Display Selectable Between Volts or %
RS232/485 ports standard
G9 Dimensions
10 HP 15 to 20 HP 25 to 30 HP NA
15 HP 20 to 25 HP 30 HP 40 to 50 HP
15.1 19.3 25.9 30.8
8.3 9.1 11.1 11.1
7.6 7.6 13.2 14.3
40 to 60 HP NA 75 HP 100 HP
NA 60 to 100 HP 125 HP NA
33.1 36.1 51.7 53.1
14.3 14.3 14.6 14.8
15 15.3 17.6 17.6
1 to 350 HP
380 to 480 V
±10%
NA NA NA NA
150 HP 200 HP 250 HP 300 to 350 HP
53.2 63.1 68.5 70
15.7 15 18.9 25.6
17.6 17.6 17.6 17.6