10
Installing the Weights
Groomer Only, with or without
Front Grass Baskets and Rear
Cutting Unit without Rear Grass
Basket
Parts needed for this procedure:
6
Carriage bolt (5/16 x 3-1/2 inches)
6
Spacer
6
Flange nut (5/16 inch)
18
Weight
Procedure
For cutting units with only the groomer kit installed
(no rear roller brush kit and no rear grass basket
installed), refer to
Figure
Figure 19
Groomer only
1. Bolts (5/16 x 3-1/2 inch)
2. Spacer (2)
19.
3. Flange nut—5/16 inch (2)
4. Weight (6)
11
Installing the Weights
Groomer and Rear Roller Brush
installed
Parts needed for this procedure:
6
Carriage bolt (5/16 x 3-1/2 inches)
6
Spacer
6
Flange nut (5/16 inch)
12
Weight
Procedure
For cutting units with the groomer kit and the rear
roller brush kit installed, refer to
Note:
The kit includes 6 weights for each cutting
unit, however, this setup requires only 4 weights per
cutting unit.
g192300
Groomer with rear roller brush kit installed
1. Bolts (5/16 x 3 inches)
2. Spacer (2)
11
Figure
20.
Figure 20
3. Flange nut—5/16 inch (2)
4. Weight (4)
g192302