Toshiba e-STUDIO GL-1010 Operator's Manual page 69

GL-1010 Scan Operator's Guide
Scanning from the Glass
Follow these steps when scanning by placing the original on the
glass.
The Scanning Status screen displays.
1
The Waiting for next page screen displays after the last page
2
is scanned.
To scan another job, press
n
again after placing another original on the glass.
To cancel the job, press the
n
button to cancel a job. The Cancel Confirm screen displays.
Press the key. The Job is canceled. To stop the
Y
ES
cancellation, press the
To change the scan settings, press the
n
the scanning settings in the Scanning Parameter Setting
screen.
For further information, refer to Scan Setting
Press the F
3 INISH
When scanning is complete, the Template Selection List
4
screen displays. Scanned image data is saved on the
controller HDD.
The number of pages that have been
transferred from the copier to the
The number of pages that have been
The auto detected original size is
displayed when Scan Setting for
or the hard
S !
CAN
C J
ANCEL O
key.
N
O
key to finish scanning.
controller is displayed.
scanned is displayed.
Original size is set to AUTO.
button
START
button or the hard
B
key to change
S
ETTING
on page 80.
69
FC