Toshiba e-STUDIO GL-1010 Operator's Manual page 79

H P
ANDLING APER
J
AMS
GL-1010 Scan Operator's Guide
Press the key. The Job is canceled. To stop the
Y
ES
cancellation, press the
To change the scan settings, press the S
n
the scanning settings in the Scanning Parameter Setting
screen.
For further information, refer to Scan Setting
Press the F
3 INISH
When scanning is complete you will return to the Template
4
Selection List screen. The scanned image data is saved on the
controller HDD.
In the event of a paper jam, the copier displays procedures on the
panel to assist with resolving the jam. When the jam is cleared,
Jam Recovery will display on the screen.
Press the hard
1
START
Press the
C
2
ANCEL
The screen will display Cancel Confirm.
3
When using the ADF, if the job stops due to an error, such as
n
Job Overflow, during the continuous scanning of multiple
key.
N
O
key to finish scanning.
button or ! to continue ADF scan.
S
CAN
key or hard
J
OB FC
key to change
ETTING
on page 80.
button to cancel a job.
79