Private Scan - Toshiba e-STUDIO GL-1010 Operator's Manual

:
N O T E
Template settings can be
edited with the
TopAccess (End User
Mode) web site. Refer to
Create Private
Templates
on page 44 or
the TopAccess Online
Help.
W
HEN USING THE
A
UTOMATIC
D F
OCUENT EEDER
:
N O T E
Remove any paper clips
or staples from originals
before placing them on
the original feed tray.
72
originals, data being read at the time of the error is canceled.
Data that was read before the error, is stored.
The maximum size for a single scan job is 180 MB. The
n
maximum size limit may be less and vary depending on the
available memory and available free space on the controller
HDD.

Private Scan

The Private Scan button is available to users who want to utilize
Groups and Templates that have been created for private use with
specific parameters and attributes. Groups and Templates may be
password protected and require a password before they can be
accessed. If the templates are not protected, they can be used by
all users connected to the controller.
Place the original(s).
1
Align the edges of the originals. Set the originals face up on
2
the feed tray and then align the sliders to the edges of the
originals.
M
The maximum number of the originals you can scan at
one time is 100 sheets.
− Up to 100 sheets (200 images if duplex) can be scanned with
the feeder. Continuous scanning is possible one time per
scan job. A maximum of 400 images can be scanned when
using continuous scan mode.
GL-1010 Scan Operator's Guide