Handset Level Adjustments - Toshiba Strata DP5000-UG-VC User Manual

Handset Level Adjustments

Change the Carbon setting if a Carbon type handset or headset is connected to the
handset jack. This feature is not available on the Single Line Telephone (SLT).
 To change the Carbon Setting
3+6+9+Hold
1. Press
Spdial
2. Press
FB1
3. Press
FB1, LED On: Carbon type handset
FB1, LED Off: DP5000 ECM handset (default)
Hold
4. Press
5. Go off-hook, then on-hook to exit the program mode.

To adjust the Handset Transmit Level for DP5000-series telephones
3
1. Press +
Redial
2. Press
3. Set the level using FB1, FB2 and FB3.
For Single Line Telephone, use 1,2,3 and Msg. See table below.
Transmit
Level
Max. (louder)
Default
Min. (softer)
Hold
4. Press
5. Go Off-hook, then on-hook to exit the program mode.
Strata CIX DP5000-series Telephone UG
(simultaneously).
.
to toggle On/Off.
to set the option.
6 9 Hold
+ + (simultaneously).
.
Handset Transmit Level
SLT Press 1 and Msg
to set the option.
10/10
FB1
Press 2 and Msg
ON
OFF
ON OFF
OFF OFF
ON
OFF
ON OFF
OFF OFF
Headset and Handset Operation
Handset Level Adjustments
FB2
Press 3 and Msg
ON
ON
ON
ON
FB3
ON
ON
ON
ON
OFF
OFF
OFF
OFF
83