Mitsubishi Electric 700 Series Instruction Manual page 21

INSTALLATION AND WIRING (FR-E700 SERIES (E kit))
(4) Securely fit the connector of the plug-in option to the inverter connector along the guides.
(5) Securely fix the both top and bottom of the plug-in option to the inverter with the accessory mounting
screws. (tightening torque 0.45N⋅m to 0.55N⋅m) If the screw holes do not line-up, the connector may
not have been plugged snugly. Check for loose plugging.
(6) Remove the PU cover provided on the front cover for plug-in option and install the other PU cover,
which was removed in (2).
(7) When wiring to the plug-in option is completed, install the front cover for plug-in option to the inverter.
(8) Install the option small cover to the front cover 1.
(9) Install the front cover 1 to the inverter.
Front cover for
plug-in option
(9) Front cover 1
(6) Replace
(8)
16
(7)
plug-in option
(5) Mounting screws
Option small cover
(4) Option connector of inverter