Model 1100KL ® Thank you for your purchase of this Health o meter Professional product. Please read this manual carefully, and keep it for easy reference or training. TABLE OF CONTENTS Caution and Warning....................3 Specifications for This Scale ..................4 Certifications / Connectivity / Disposal ..............5 Assembly Instructions 1100KL Scale ...............6...
CAUTION AND WARNING To prevent injury and damage to your scale, please follow these instructions very carefully. Assemble and operate the scale per the enclosed user instructions. Operate this scale exclusively with the AC adapter provided by Health o ®...
SPECIFICATIONS FOR THIS SCALE General The Model 1100KL digital handrail scale uses highly sophisticated microprocessor technology. Each precision scale is designed to provide accurate, reliable and repeatable weight measurements. In addition, each scale is designed to provide the user with features that make the weighing process simple, fast, and convenient.
This scale is EMR-EHR compatible. For more information regarding how to connect this scale to ® other electronic devices, please contact Health o meter Professional Scales Technical Support, available during normal business hours at 1-800-638-3722.
1100KL ASSEMBLY INSTRUCTIONS Before Assembly Each 1100KL digital handrail scale is shipped disassembled in a single carton. Carefully inspect the carton for shipping damage before unpacking. If damage is found, contact your shipper or a ® Health o meter Professional representative immediately at 1-800-815-6615. Claims must be filed with the shipper as soon as possible after receipt of the package.
Page 7
1100KL ASSEMBLY INSTRUCTIONS (CONTINUED) Assembling the 1100KL Scale (Refer to Figures 1-7) Caution: It is recommended that the assembly be performed by two persons. 1. Remove the scale platform from the carton and place scale platform on a flat, level, and dry surface.
Page 8
1100KL ASSEMBLY INSTRUCTIONS (CONTINUED) 14. Place the pivot bracket screw covers over the pivot screws. Fasten the covers to the back of the display using (4) Phillips pan head M4 screws (D). Use Phillips head screwdriver to tighten the screws (see Figures 1 & 5).
2. Remove the battery cover on the side of the display assembly by unscrewing the (2) battery cover screws (see Figure 7). 3. Replace or install the batteries with new units. Health o meter recommends using an alkaline or lithium battery, rated for 130°F (54°C) operation. Do not use Zinc-Carbon batteries.
QUICK START / OPERATING INSTRUCTIONS Keypad Figure 9 Function Description ON/OFF Power scale on and off. ZERO Zeros the scale prior to a weighing. Holds the weight value of the patient on the display until the button is HOLD/RELEASE pressed again to clear the value. Also moves the cursor from left to right ►...
Page 15
When using this scale, the weight of an object, such as a chair, can be subtracted from the total weight in order to determine the weight of the patient alone. The Tare Function automatically performs this subtraction. The 1100KL scales allow tare weight to be entered manually by using the keypad, or automatically, as outlined in this section.
Page 16
5. Once a weight has been displayed, while the patient is still on the scale, Health o meter recommends performing a second weighing by pressing the REWEIGH button.
Page 17
5. Once a weight has been displayed, while the patient is still on the scale, Health o meter recommends performing a second weighing by pressing the REWEIGH button.
Maintenance The following pages provide instructions for maintenance, cleaning, calibration, and troubleshooting for the 1100KL scale. Maintenance operations other than those described in this manual should be performed by qualified service personnel. Caution: Before first use, or after long periods of non-use, check the scale for proper operation and function.
This scale has been factory calibrated, and does not require calibration prior to use. For maintenance, the scale can be calibrated. Calibration of your 1100KL scale is performed using kilograms (KG) or pounds (LB), according to the units of measure used upon entering into the calibration path.
TROUBLESHOOTING Troubleshooting Before contacting service personnel, refer to the following instructions to check and to correct any failures. Symptom Possible Cause Corrective Action Scale does not power on 1. Dead Battery 1. Replace batteries 2. Faulty electrical outlet 2. Use a different outlet 3.