LG TEC Multi Instruction Manual page 31

Stimulation
is ineffective.
The skin
becomes
red and/or you
feel a stabbing
pain
Output current
stops during
therapy
Program option in
use
Improper electrode
and applicator
placement
Unknown
Use the electrodes
on the same site
every time.
The electrodes
aren't stuck onto
the skin properly.
The electrodes are
dirty.
The surface of the
electrode was
scratched.
The electrode pads
come off the skin.
The cable is
disconnected
The power of the
batteries has been
exhausted.
31
3. If still intermittent after
replacing lead wire, a
component may have failed.
Call the repair department.
Some programs will seem
intermittent. This is expected.
Refer to the Program
Option Controls in the
Operation section for a
description of the program
option.
Reposition electrode
and applicator
Contact clinician.
Re-position the electrodes. If
at any time you feel pain or
discomfort stop use
immediately.
Ensure the electrode is stuck
securely on the skin.
Clean the electrode pads with
a damp, lint free cloth or
replace new electrode pads.
Clean the electrode belt
according the description in
user manual.
Replace new electrode.
Turn off the device and stick
the electrode pad firmly to
the skin.
Turn off the device and
connect the cable
Please replace them with new
batteries.