Page 1
Form No. 3430-958 Rev A Multi-Purpose Tool Compact Tool Carrier Model No. 22423—Serial No. 404320000 and Up *3430-958* A Register at www.Toro.com. Original Instructions (EN)
Whenever you need service, genuine Toro parts, or Contents additional information, contact an Authorized Service Dealer or Toro Customer Service and have the model and serial numbers of your product ready. Figure 1 Safety ............... 3 identifies the location of the model and serial numbers General Safety ...........
Slope Safety Safety • Operate the machine up and down slopes with the heavy end of the machine uphill. Weight DANGER distribution changes with attachments. An empty load-bearing attachment makes the rear of the There may be buried utility lines in the work machine the heavy end, and a full load-bearing area.
Safety and Instructional • Do not remove or add attachments on a slope. • Do not park the machine on a hillside or slope. Decals Safety decals and instructions are Multi-Purpose Tool Safety easily visible to the operator and are located near any area of potential •...
Setup Product Overview Installing an Accessory to the Tool Frame All accessories (scarifier teeth, boom jib, and hitch) are installed into the slots in the tool frame in the same way. g004043 Figure 3 Scarifier tooth installation shown g004060 Figure 4 1.
To ensure optimum performance and continued safety g004044 Figure 5 certification of the machine, use only genuine Toro replacement parts and accessories. Replacement parts and accessories made by other manufacturers Use the boom jib to lift and transport various items, could be dangerous, and such use could void the such as balled trees.
WARNING Pulling tree stumps and other items can weaken the chain. The chain could break and snap back, causing serious injury. Do not attempt to pull tree stumps and other large objects with the boom jib. Using the Scarifier/Ripper g004046 Figure 7 With the hitch installed, the multi-purpose tool can be used to move trailers.
Maintenance Storage Before long-term storage, wash the attachment Replacing Scarifier Teeth with mild detergent and water to remove dirt and Tips grime. Paint all scratched or bare metal surfaces. Service Interval: Every 25 hours—Check the scarifier Note: Paint is available from your Authorized teeth tips for damage or wear.
Page 12
While the exposure from Toro products may be negligible or well within the “no significant risk” range, out of an abundance of caution, Toro has elected to provide the Prop 65 warnings. Moreover, if Toro does not provide these warnings, it could be sued by the State of California or by private parties seeking to enforce Prop 65 and subject to substantial penalties.