Sony DVCAM DSR-PDX10 Service Manual page 353

Dubbing only desired scenes
– Digital program editing (on tapes)
You can duplicate selected scenes (programmes) for editing onto a tape without
operating the VCR.
Scenes can be selected by frame. You can set up to 20 programmes.
Your camcorder can dub on a "Memory Stick." See p. 167 for more information.
Unwanted scene
Before operating the Digital program editing on tapes
recorded on other equipment
Step 1 Connecting the VCR.
Step 2 Setting the VCR for operation (p. 102, 106).
Step 3 Adjusting the synchronization of the VCR (p. 107).
When you dub using the same VCR again, you can skip steps 2 and 3.
Using the Digital program editing on tapes recorded on other
equipment
Operation 1 Making a programme (p. 109).
Operation 2 Performing the programme (dubbing a tape) (p. 111).
Note
When editing digital video on tapes, the operation signals cannot be sent with the
LANC.
Step 1: Connecting the VCR
You can connect both an A/V connecting cable and an i.LINK cable.
When you use the A/V connecting cable, connect the devices as illustrated on page 98.
When you use the i.LINK cable, connect the devices as illustrated on page 100.
If you connect using the i.LINK cable
With a digital-to-digital connection, video and audio signals are transmitted in digital
form for high-quality editing.
Unwanted scene
Switch the order
101