Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for DeWalt XR DCF622
Summary of Contents for DeWalt XR DCF622
- Page 1 DCF622 Final page size: A5 (148mm x 210mm)
- Page 2 English (original instructions) Copyright D WALT...
- Page 3 Fig. A Fig. B Fig. C Fig. E Fig. D...
- Page 4 Fig. F Fig. G...
-
Page 5: Technical Data
English CORDLESS SELF-DRILLING SCREWDRIVER DCF622 Congratulations! Battery pack DCB181 DCB182 You have chosen a D WALT tool. Years of experience, thorough Battery type Li-Ion Li-Ion product development and innovation make D WALT one of the Voltage most reliable partners for professional power tool users. Capacity Technical Data Weight... -
Page 6: Definitions: Safety Guidelines
English WARNING: Indicates a potentially hazardous situation Charger DCB118 which, if not avoided, could result in death or Mains voltage serious injury. Battery type 18/54 Li-Ion CAUTION: Indicates a potentially hazardous situation Approx. charging time of 22 (1.3 Ah) 22 (1.5 Ah) 30 (2.0 Ah) which, if not avoided, may result in minor or battery packs... -
Page 7: Personal Safety
English f ) If operating a power tool in a damp location is other condition that may affect the power tool’s unavoidable, use a residual current device (RCD) operation. If damaged, have the power tool repaired protected supply. Use of an RCD reduces the risk of before use. -
Page 8: Important Safety Instructions For All Battery Chargers
English Electrical Safety NOTICE: Under certain conditions, with the charger plugged into the power supply, the exposed charging The electric motor has been designed for one voltage only. contacts inside the charger can be shorted by foreign Always check that the battery pack voltage corresponds to the material. -
Page 9: Charger Operation
English 2. Insert the battery pack into the charger, making sure the Wall Mounting 11 battery pack is fully seated in the charger. The red (charging) These chargers are designed to be wall mountable or to sit light will blink repeatedly indicating that the charging upright on a table or work surface. -
Page 10: Storage Recommendations
English Contents of opened battery cells may cause respiratory The information provided in this section of the manual is • irritation. Provide fresh air. If symptoms persists, seek medical provided in good faith and believed to be accurate at the time attention. -
Page 11: Battery Type
English Do not probe with conductive objects. Wear ear protection. Do not charge damaged battery packs. Wear eye protection. Do not expose to water. Visible radiation. Do not stare into light. Have defective cords replaced immediately. Date Code Position (Fig. A) The date code , which also includes the year of manufacture, 13 ... -
Page 12: Lock-On Button
English Dead Spindle Drive Clutch from a locked-on condition, squeeze and release the trigger once. Before using the tool (each time), be sure that the locking This screwdriver is equipped with a dead spindle feature; the button release mechanism is working freely. spindle does not turn until the fastener is pressed into the CAUTION: Be sure to release the locking mechanism workpiece. -
Page 13: Protecting The Environment
English OPERATION output giving the operator the option to drive a wide range of fastener sizes. Instructions for Use MAINTENANCE WARNING: Always observe the safety instructions and Your D WALT power tool has been designed to operate applicable regulations. over a long period of time with a minimum of maintenance. WARNING: To reduce the risk of serious personal Continuous satisfactory operation depends upon proper tool injury, turn tool off and disconnect battery pack... - Page 16 Belgique et WALT - Belgium BVBA Tel: NL 32 15 47 37 63 www.dewalt.be Luxembourg België Egide Walschaertsstraat 16 Tel: FR 32 15 47 37 64 enduser.BE@SBDinc.com en Luxemburg 2800 Mechelen Fax: 32 15 47 37 99 Danmark WALT Tel: 70 20 15 10 www.dewalt.dk...