Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for DeWalt XR DCD771
Summary of Contents for DeWalt XR DCD771
- Page 1 DCD771 DCD776...
- Page 2 English (original instructions) Copyright D WALT...
- Page 3 Fig. A DCD771 Fig. B...
- Page 4 Fig. C Fig. D Fig. E Fig. F DCD776 Fig. G Fig. H Fig. I...
-
Page 5: Technical Data
English 18V DRILL/DRIVER/IMPACT DRILL DCD771, DCD776 Congratulations! accessories or is poorly maintained, the vibration and/or noise emission may differ. This may significantly increase the You have chosen a D WALT tool. Years of experience, thorough exposure level over the total working period. product development and innovation make D WALT one of the An estimation of the level of exposure to vibration and/or... -
Page 6: Definitions: Safety Guidelines
English Batteries Chargers/Charge Times (Minutes)*** Weight (kg) DCB104 DCB107 DCB112 DCB113 DCB115 DCB116 DCB117 DCB118 DCB132 DCB119 Cat # DCB546 18/54 6.0/2.0 1.08 DCB547 18/54 9.0/3.0 1.46 135* 110* 135* DCB548 18/54 12.0/4.0 1.46 DCB181 0.35 DCB182 0.61 60/40** 60/45** 60/40** 60/40** DCB183/B/G 0.40 DCB184/B/G... -
Page 7: Personal Safety
English 4) Power Tool Use and Care b ) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and a ) Do not force the power tool. Use the correct power refrigerators. There is an increased risk of electric shock if tool for your application. -
Page 8: Residual Risks
English Do not operate this tool for long periods of time. unpredictable behaviour resulting in fire, explosion or risk • of injury. Vibration caused by hammer action may be harmful to your f ) Do not expose a battery pack or tool to fire or hands and arms. -
Page 9: Important Safety Instructions For All Battery Chargers
English Important Safety Instructions for All • In case of damaged power supply cord, the supply cord must be replaced immediately by the manufacturer, its service agent Battery Chargers or similar qualified person to prevent any hazard. SAVE THESE INSTRUCTIONS: This manual contains important Disconnect the charger from the outlet before attempting •... -
Page 10: Wall Mounting
English reach or exceed 40 ˚C (104 ˚F) (such as outside sheds or The DCB118 charger is equipped with an internal fan designed to metal buildings in summer). cool the battery pack. The fan will turn on automatically when the battery pack needs to be cooled. Never operate the charger if the Do not incinerate the battery pack even if it is severely •... -
Page 11: Storage Recommendations
English Labels on Charger and Battery Pack In most instances, shipping a D WALT battery pack will be excepted from being classified as a fully regulated In addition to the pictographs used in this manual, the Class 9 Hazardous Material. In general, only shipments containing labels on the charger and the battery pack may show the a lithium-ion battery with an energy rating greater than 100 Watt following pictographs:... -
Page 12: Assembly And Adjustments
English • This product is not intended for use by persons (including 2 Li-Ion battery packs (C2, D2, E2, G2, H2, L2, M2, P2, Q2, S2, T2, children) suffering from diminished physical, sensory or U2, X2, Y2, Z2 models) mental abilities; lack of experience, knowledge or skills 3 Li-Ion battery packs (C3, D3, E3, G3, H3, L3, M3, P3, Q3, S3, T3, unless they are supervised by a person responsible for their U3, X3, Y3, Z3 models) -
Page 13: Operation
English To select reverse, release the trigger switch and depress the 2. Grasp the black sleeve of the chuck with one hand and forward/reverse control button on the left side of the tool. use the other hand to secure the tool. Rotate the sleeve anticlockwise (as viewed from the front) far enough to The centre position of the control button locks the tool in the off position. -
Page 14: Maintenance
English 3. For WOOD, use twist bits, spade bits, power auger bits or WARNING: To reduce the risk of serious personal hole saws. For METAL, use high-speed steel twist drill bits injury, turn tool off and disconnect battery pack or hole saws. Use a cutting lubricant when drilling metals. before making any adjustments or removing/ The exceptions are cast iron and brass which should be installing attachments or accessories. - Page 16 Belgique et WALT - Belgium BVBA Tel: NL 32 15 47 37 63 www.dewalt.be luxembourg België en luxemburg enduser.BE@sBDinc.com Egide Walschaertsstraat 16 Tel: FR 32 15 47 37 64 2800 Mechelen Fax: 32 15 47 37 99 Danmark WALT (Stanley Black&Decker AS)