Safety; General Safety; Sound Power Level; Sound Pressure Level - Toro Groundsmaster 3500-D Operator's Manual

Safety

This machine has been designed in accordance with
EN ISO 5395:2013 and ANSI B71.4-2012.

General Safety

This product is capable of amputating hands and
feet and of throwing objects. Always follow all safety
instructions to avoid serious personal injury.
Using this product for purposes other than its intended
use could prove dangerous to you and bystanders.
•
Read and understand the contents of this
Operator's Manual before you start the engine.
Ensure that everyone using this product knows
how to use it and understands the warnings.
•
Do not put your hands or feet near moving
components of the machine.
•
Do not operate the machine without all guards
and other safety protective devices in place and
working on the machine.
•
Keep clear of any discharge opening. Keep
bystanders a safe distance from the machine.
•
Keep children out of the operating area. Never
allow children to operate the machine.
•
Stop the machine and shut off the engine before
servicing, fueling, or unclogging the machine.
Improperly using or maintaining the machine can
result in injury. To reduce the potential for injury,
comply with these safety instructions and always pay
attention to the safety-alert symbol, which means
Caution, Warning, or Danger—personal safety
instruction. Failure to comply with these instructions
may result in personal injury or death.
You can find additional items of safety information in
their respective sections throughout this manual.

Sound Power Level

This unit has a guaranteed sound power level of 104
dBA, which includes an Uncertainty Value (K) of 1
dBA.
Sound power level was determined according to the
procedures outlined in ISO 11094.

Sound Pressure Level

This unit has a sound pressure level at the operator's
ear of 90 dBA, which includes an Uncertainty Value
(K) of 1 dBA.
Sound pressure level was determined according to
the procedures outlined in EN ISO 5395:2013.
CAUTION
Long-term exposure to noise while operating
the machine may cause some hearing loss.
Wear adequate hearing protection whenever
you operate the machine for an extended
period of time.

Vibration Level

Hand-Arm
Measured vibration level for right hand = 0.5 m/s
Measured vibration level for left hand = 0.7 m/s
Uncertainty Value (K) = 0.5 m/s
Measured values were determined according to the
procedures outlined in EN ISO 5395:2013.
Whole Body
Measured vibration level = 0.44 m/s
Uncertainty Value (K) = 0.5 m/s
Measured values were determined according to the
procedures outlined in EN ISO 5395:2013.
4
2
2
2
2
2