Table of Contents
Advertisement
C.2
LAN Bypass
The FWS-7821 provides a LAN Bypass kit which allows uninterrupted network traffic,
even if a single in-line appliance is shut down or hangs.
C.2.1
LAN Bypass Configuration
LAN_ID2
LAN_ID1
0
0
0
0
0
1
0
1
1
0
Function
LAN_ID3
Use for selecting which LAN kit will be configured, refer to Table 1 of
LAN_ID2
ID Select table of LAN kit.
LAN_ID1
They should be set before ACT_EN.
LAN_ID0
Use for configuring LAN Bypass function behavior to LAN kit, when
system power on.
PWR_ON
1: Bypass
0: Pass Through
Use for configuring LAN Bypass function behavior to LAN kit, when
system power off.
PWR_OFF
1: Bypass
0: Pass Through
Use for configuring WDT function behavior to LAN kit, when WDT
triggered.
WDT_EN
0: Normal WDT reset (Default)
1: Force Bypass
Use for activating programming of LAN kit. It is edge triggering
ACT_EN
(falling edge 1 to 0) and should be set to high(1) as its normal state.
Appendix C – Standard Firewall Platform Setting
Table 1 : ID Select table of LAN kit
LAN_ID0
0
1
0
1
0
Table 2 : LAN Bypass relative register table
LAN kit selected
LAN Kit 1 Selected
LAN Kit 2 Selected
LAN Kit 3 Selected
LAN Kit 4 Selected
LAN Kit 5 Selected
Description
108
Advertisement
Table of Contents
