Compacting Asphalt
When using the machine on asphalt, the water system
is used to wet the surface of the compactor to prevent
the asphalt from sticking to the compactor.
Adding Water with the Tank
Installed
1.
Remove the cap from the water tank
1. Water-tank cap
2. Water
2.
Fill the tank with water
3.
Install the cap onto the water tank
(Figure
Figure 9
3. Water tank
(Figure
9).
(Figure
Adding Water with the Tank
Removed
1.
Detach the valve coupler
9).
g024848
1. Shutoff valve
2. Female coupler
2.
Remove the water tank from the frame by pulling
up on the elastic tank latch
9).
1. Elastic tank latch
3.
Fill the tank with water, assemble it to the frame,
and attach the coupler.
10
(Figure
10).
Figure 10
3. Male coupler
4. Sprinkler manifold
(Figure
11).
Figure 11
g024875
g019702