Storage - Toro FP-2200 Operator's Manual

Storage

1. Shut off the engine and disconnect the
spark-plug wire from the spark plug.
2. Remove dirt and grime from the entire machine.
Important:
You can wash the machine with
mild detergent and water. Do not pressure
wash the machine. Avoid excessive use of
water, especially near the engine.
3. Service the air cleaner; refer to
Cleaner (page 14).
4. Change the engine oil; refer to
Engine Oil (page
5. For storage over 30 days, prepare the unit as
follows:
A. Add a petroleum-based fuel
stabilizer/conditioner to fuel in the
tank. Follow mixing instructions from
stabilizer manufacturer (1 fl oz per gallon).
Do not use an alcohol-based stabilizer
(ethanol or methanol).
Note:
A fuel stabilizer/conditioner is most
effective when mixed with fresh fuel and
used at all times.
B. Run the engine until it stops from running
out of fuel.
C. Choke the engine.
D. Start and run the engine until it does not
start again.
E. Dispose of fuel properly. Recycle as per
local codes.
Important:
Do not store
stabilizer/conditioned fuel over 90 days.
6. Check and tighten all bolts, nuts, and screws.
Repair or replace any part that is damaged.
7. Paint all scratched or bare metal surfaces. Paint
is available from your Authorized Service Dealer.
8. Store the machine in a clean, dry garage or
storage area.
9. Cover the machine to protect it and keep it clean.
Servicing the Air
Changing the
16).
20