Toro FP-2200 Operator's Manual page 17

Servicing the Eccentric Oil
Oil type: 10W30 (API service SJ or higher)
Oil capacity:
•
1.3 L (1.4 US qt) for Model 68025
•
3.3 L (3.5 US qt) for Model 68026
•
3.5 L (3.7 US qt) for Model 68027
Checking the Eccentric-Oil Level
Service Interval: Monthly
1. Set the throttle to slow, shut off the engine, and
wait for all moving parts to stop.
2. Place a drain pan under the oil plug and remove
the oil-plug screw on the side of the eccentric
housing (Figure 23).
Figure 23
1. Oil plug
3. Verify that the eccentric oil is level with the bolt
hole.
4. Wipe up any spilled oil.
5. Replace the oil-plug screw.
g020132
2. Eccentric-oil-filler hole
Changing the Eccentric Oil
Service Interval: Every 300 hours
1. Set the throttle to slow, shut off the engine, and
wait for all moving parts to stop.
2. Place an oil drain pan under the oil plug and
remove the fill plug and the oil plug screw
(Figure 23).
3. Tip the plate compactor forward slightly and use
a suction gun to remove the oil through the filler
hole (Figure 23).
4. Slowly pour oil into the filler hole until the oil
comes out the oil plug
5. Wipe up any spilled oil.
6. Replace the fill plug and the oil plug screw.
17
(Figure 23).