SONOLINE G20 System Delivery Procedure
10. Press Print on the front panel of the printer and verify that the image prints.
11. Press Copy on the front panel of the printer and verify that the image prints.
NOTE
Verify VCR Operation (if installed)
1. Verify the cable connections between the HS-MD3000 S-VCR and the G20 system.
- Verify that the AC power cord is connected between the VCR AC inlet and the OEM
shelf outlet.
2. Verify the VCR cables are connected between the VCR and the I/O module.
Fig. 22: VCR Cable Connections (from the I/O Module to the VCR)
Pos. A
Pos. B
Siemens
Medical Solutions USA, Inc.
Contact the Siemens Uptime Service Center if there are any prob-
lems with the printer.
S-Video out
S-Vidoe in
US06-101.812.01.02.02
10.04
Page 21 of 26
sd
21
0
SONOLINE G20