Huawei ECC500 User Manual page 88

ECC500
User Manual
Step 2 (Optional) Install a network security certificate if a certificate problem message is displayed.
For details, see
Figure 5-25 Security certificate problem message
Step 3 Set User Name and Password, and click Log In. The WebUI login page is displayed, as
shown in
Figure 5-26 ECC500 WebUI login page
Step 4 Choose Monitoring > System Equipment > Running Parameter.
Step 5 Set Enable online detection to Enable.
Step 6 Click Submit.
Step 7 Set Device address and Device name.
Set Device address and Device name to the IP address and name of the networked device
respectively, for example, XXX.XXX.XXX.XXX and No._X_ATM_at_XXX_site, as shown
in Figure
Issue 05 (2020-03-16)
7.3 How Can I Install a Network Security
This operation is performed on Windows 7. If another operating system is used, perform this operation
based on actual conditions.
Figure 5-26.
5-27.
Copyright © Huawei Technologies Co., Ltd.
5 UI Description
Certificate?.
80