Toro Greensmaster Flex 1820 Operator's Manual page 16

Figure 28
1. Bedbar
2. Bedknife
4. Torque the 2 outer screws to 1 N∙m (10 in-lb).
5. Working form the center of the bedknife, torque
the screws to 23 to 28 N∙m (200 to 250 in-lb).
Figure 29
1. Bednife screw tool
2. Install and torque these
first to 1 N∙m (10 in-lb).
6. Grind the bedknife.
g255045
3. Screw
g255046
3. Torque to 23 to 28 N∙m
(200 to 250 in-lb).
Bedknife Specifications
Bedknife Grinding Specifications
1. Relief angle
2. Top face
3. Remove burr
Standard bedknife relief angle
Extended bedknife relief angle
Front angle range
16
Figure 30
4. Front face
5. Front angle
3° Minimum
7° Minimum
13° to 17°
g032182