ABB 83342-500 Operating Instructions Manual page 42

Operating Instructions
ABB-Welcome
Fig. 25
4. Select a Telephone Gateway device in the list, and input the password. Default password: 1234.
Fig. 26
5. If the password is correct, it will display as follows:
Fig. 27
No. Function
1 Click "Edit" to change the passwords. (4 digits)
2 Installer can select "Enable" or "Disable" for Direct-accept from the list.
3 Installer can Enable/Disable "Call Divert for All Indoor Stations."
4 This Admin Password is used when user logs in at TGW.
5 Installer can edit Default Phone Number directly with maximum 16 digits.
6 Installer can Enable/Disable "Indoor Station PIN Active for all Indoor Stations ."
7 All Indoor Station numbers are listed from 1 to 250.
8 Installer can select "Yes" or "No" from "Existed" according to actual installation.
a.
b.
9 Installer can select "Enable" or "Disable" from "Indoor Station PIN Active."
10 Installer can select "Default" or "Primary" or "Secondary" from "Call Divert Number Active ."
11 Installer can edit Primary and Secondary Phone Number, with maximum phone number is 16 digits .
12 Installer can edit Indoor Station PIN. (4 digits)
Operating Instructions |V1.0
If "Yes" is selected, all parameters on its right can be edited.
If "No" is selected, all parameters on its right is deleted, which means this Indoor Station is deleted
from the Indoor Station address.
Error! Use the Home tab to apply
标题 1 to the text that you want to
appear here.
— 42 —