Operating Instructions
ABB-Welcome
4.2.2
Option 2: Entering the IP address directly
Preconditions:
–
There is a DHCP server on the network, e.g. integrated in the router.
–
The IP-Gateway is connected to the router by a LAN cable.
–
The PC is connected to to the router by a LAN.
–
The IP-Gateway is connected and ready for operation.
1. Link the external device in a common network to the IP-Gateway.
2. Launch the control panel.
3. Get the DHCP server address according to the following steps.
For example: the DHCP server address is 192.168.1.1.
Fig. 3:
Get DHCP server address
4. Open the user interface of your router.
Enter the DHCP server address directly into the address line of your browser to see a list of all connected
devices including their names and IP addresses. Copy the IP address of the device "IP-Gateway."
Operating Instructions |V1.0
3
6
4
2
Error! Use the Home tab to apply
标题 1 to the text that you want to
1
5
appear here.
7
— 12 —