Installation Procedures; Chassis Installation; Pole Installation - Toshiba F-LYA20HKG Owner's Manual

Installation Procedures

Position the pole and chassis sockets
in the direction shown, insert the pole
into the chassis socket and stabilize it;
pole
Chassis
First, you need to align the hole of the
machine body with the pole, then rotate it
in and x it to complete the installation of
the pole, be sure to rotate in place.
The arrow mark of the upper column tube
is to be within the identi cation range of
the lower column tube.
According to the direction shown, make the
rear grill of the fan upward in the direction of
the arrow, and make the round hole aligned
with the salient point on the front enclosure of
the motor;
Convex
cylinder

Chassis Installation

Pole Installation

Rear Grill Installation
Round hole
Insert the bolt into the hole at the bottom of
the chassis and tighten the bolt to x the
pole and chassis.
After the motor head is hung on the rear grill,
rotate the plastic nut clockwise to lock the
rear grill.
3
Lock nut of grill