1
3
1
3
ELECTRIC
2
4
2
4
Replace Transformer
First see
Removing the Front
Cover (p. 32)
1� Remove lid and seal with four
screws�
2� Remove ground cable with nut
and washer.
3� Remove the three locking nuts
and washers.
4� Remove the two cables from
the Terminal Blocks using a
flat crewdriver. Then lift the
transformer out�
Reverse steps for assembly�
Remove Pressure Switch
First see
Removing the Front
Cover (p. 32)
1� Remove lid and seal with four
screws�
2� Remove the connector�
3� Cut the strap�
Remove the switch�
Reverse steps for assembly�
11.2
37