Toro TX 1000 Operator's Manual page 12

1. Warning—read the Operator's Manual.
2. Warning—receive training before operating the machine.
3. Warning—wear hearing protection.
4. Warning—engage the parking brake, lower the bucket to the
ground, shut off the engine, and remove the key from the
ignition before leaving the machine.
5. Electrocution hazard, power lines—check for power lines in
the area before using the machine.
6. Crushing hazard—keep away from pinch points; read
the Operator's Manual before servicing or performing
maintenance.
1. Power socket
2. Hydraulic fluid—slow
3. Hydraulic fluid—fast
4. Hydraulic attachment—neutral
5. Hydraulic attachment—forward
6. Hydraulic attachment—reverse
131-0710
7. Cutting/severing hazard of hand or foot—wait for all moving
parts to stop before servicing; keep away from moving parts;
keep all guards and shields in place.
8. Explosion hazard; electrocution hazard—call the local utilities
hotline before beginning work in an area.
9. Crushing hazard—keep away from the bucket when operating
the machine; keep bystanders away from the machine.
10. Tipping hazard—always move up or down slopes with the
bucket lowered; never drive on a slope with the bucket raised;
always operate with the heavy end uphill; always carry loads
low; never jerk the control levers; use a steady, even motion.
11. Tipping hazard—do not make fast turns; always check behind
you before reversing the machine.
136-5824
7. Engine speed
8. Lower/float the attachment.
9. Tilt the attachment forward.
10. Raise the attachment.
11. Tilt the attachment rearward.
12. Lever lock
12
decal131-0710
decal136-5824