Ordering Replacement Parts; Troubleshooting - Silvercrest SEM 1100 B3 Operating Instructions Manual

Ordering replacement parts

You can order the following replacement parts for the product SEM 1100 B3:
▯ Descaler
Order the product via our service hotline (see section Service) or comfortably
on our web page under www.kompernass.com.
NOTE
► Have the IAN number of the appliance ready (can be found on the cover
of these operating instructions) when you place your order.

Troubleshooting

Malfunction
The espresso no longer
flows out.
The espresso drips over
the edges of the sieve
holder , not from the
openings.
■ 20 │ GB │ IE │ NI │ CY
(125 ml)
Cause
• The espresso powder is too
moist and/or compressed
too tightly.
• No water in the water tank
• The holes of the sieve holder
openings are blocked.
• The sieve holder
correctly inserted.
• The sieve holder openings are
blocked.
• There are espresso powder
residues on the edges of the
sieve holder .
Solution
• Re-prepare the espresso
without compressing the
powder as firmly; if neces-
sary, use new powder.
• Fill the water tank
.
with water.
• Clean the sieve holder
is not • Insert the sieve holder
correctly.
• Clean the sieve holder
• Clean the espresso powder
residues from the edges of
the sieve holder
.
.
.
SEM 1100 B3