Restrictions For The Sub Remote Controller - Mitsubishi Electric CITY MULTI PAR-40MAAU Instruction Book

Main menu Setting items
Energy Energy
saving saving
Initial Basic
setting setting
Display
setting
Service Initialize remote
controller
Remote controller
information
Maintenance Error information
Filter information

Restrictions for the sub remote controller

Schedule Set the start/stop times to operate the units in the energy-save
mode for each day of the week, and set the energy-saving rate.
Up to four energy-save operation patterns can be set for each day.
Time can be set in 5-minute increments.
Energy-saving rate can be set to a value from 0% and 50 to 90%
in 10% increments.
* Clock setting is required.
Clock Use to set the current time.
Daylight Sets the daylight saving time.
saving
time
Main Use to switch between "Full" and "Basic" modes for the Status
display display and the Main display.
The default setting is "Full."
Black and Use to invert the colors of the display, turning white
white background to black and black characters to white.
inversion
setting
Contrast Use to adjust screen contrast and brightness.
Brightness
Language Use to select the desired language.
selection
Use to initialize the remote controller to the factory shipment
status.
Use to display the remote controller model name, software
version, and serial number.
Use to check error information when an error occurs.
Error code, error source, refrigerant address, unit model,
* The unit model, manufacturing number, and contact information
need to be registered in advance to be displayed.
Use to check the filter status.
The filter sign can be reset.
Setting details
The following settings cannot be made from the sub
remote controller. Make these settings from the main
remote controller. "Main" is displayed in the title of the
Main menu on the main remote controller.
Timer
(On/Off timer, Auto-Off timer, Weekly timer, OU silent
mode)
Energy saving
(Auto return, Schedule)
Maintenance
(Manual vane angle)
Page
49
52
54
56
57
59
60
62
64
65
69
21