Husqvarna 524LK Operator's Manual page 14

7. Move the product 3 m/10 ft or more away from the
refueling area and fuel source before you start the
engine.
Note: To see where the fuel tank is on your product,
Product overview on page 3 .
refer to
To start the product
1. Move the stop switch to the start position.
2. Set the choke control to the choke position.
3. Push the air purge bulb until fuel starts to fill the air
purge bulb.
4. Hold the product to the ground.
14
5. Pull the starter rope handle slowly with your right
hand until you feel resistance.
WARNING: Do not wind the starter rope
around your hand.
CAUTION: Do not pull the starter rope to
full extension and do not let go of the
starter rope handle. This can cause
damage to the product.
6. Pull the starter rope handle quickly and with force
until the engine starts.
7. Set the choke control to the operation position.
WARNING: Keep body parts away from
the spark plug cap. Risk of burn injuries.
Do not use the product with a damaged
spark plug cap. Risk of electrical shock.
To stop the product
• Move the stop switch to the stop position to stop the
engine.
1309 - 001 - 08.07.2020