Advertisement
www.freeservicemanuals.info
Preparations
Wiring Diagram
Antenna
ISO C3 Connector
PHILIPS CD changer
Purple
Purple/
Gray
Gray/
White/
Black
Black
Black
Stripe
Stripe
Stripe
Right Speaker
Right Speaker
Left Speaker
(
Rear
)
(Front)
(Front)
Using the ISO Connector
1.If your car is equipped with the ISO connector, then connect the ISO connectors as illustrated.
2. For connections without the ISO connectors, check the wiring in the vehicle carefully
serious damage to this unit.
Cut the connector, connect the colored leads of the power cord to the car battery,
power cable connections
ISO Connector
Ignition key
Red
+12V DC When ON/ACC
Black
Ground Lead
Motor/Electric Antenna relay control Lead
Bl ue
Amplifier relay control Lead
Yellow
To car battery(+)
Continuous +12V DC
White
Green/
Green
Black
Stripe
Left Speaker
(Rear)
Connector
Rear Right(-)---Purple/Black Stripe
Battery 12V (+)/yellow
Front Right(-)---Gray/Black Stripe
Auto Antenna/blue
Front Left((-)---White/Black Stripe
ACC+/red
Rear Left(-)---Green/Black Stripe
Ground/black
1-6
Aux-in
Black
Fuse 15A
Connector
Line-out (Gray)
before connecting, incorrect connection may cause
as shown in the colour code table below for speaker and
Connector
Rear Right(+)---Purple
Front Right(+)---Gray
Front Left(+)---White
Rear Left(+)---Green
R ( Red )
AUDI O OUT
L ( White )
A mplifier
R(Red)
L(White)
For some VW/Audi or Opel( Vauxhall)
car models, you may need t o modify
wiring of the supplied power cord as
illustrated, or else the memory of the
unit may be lost after you power off.
Contac t your aut horized car dealer
before installing this unit.
Origin al wiring
Yellow
Yellow
Red
R ed
M odified wirin g
Yellow
Yellow
Red
R ed
Advertisement
