Install Cabinets For Bottom-Row On Power Bar; Figure 52: Installing The First Cabinet; Figure 53: Installing Additional Cabinets - First Row; Figure 54: Locking Two Modules - NEC FA Series User Manual

Install Cabinets for Bottom-Row on Power Bar

Use the grip handles on the cabinet (Figure
52, A) to bring it into position at left corner
on the Power bar.
Align together the Cabinet hanger pins with
the frame support sockets (B) and the Corner
alignment pins on the Power bar (C).
Lower the cabinet onto the Network-PS
socket (D), gently pressing it until it sits
firmly.
Notice
Place the cabinet carefully and straight on top of the
Network-PS socket. Otherwise, the data connection
may be pushed out and not function properly.
A

Figure 52: Installing the First Cabinet

Install further cabinets until the first row is
complete.
Connect each cabinet to its adjacent cabinets
with the Cabinet interlocks.
Push in the lock bolt.
Turn the lock bolt 90° to lock.
Fix the black nut to secure the lock
finger tight.
Notice
Do not tighten the Cabinet interlocks too much.
Otherwise the cabinets cannot be aligned later on.
A
B
D
C
Figure 53: Installing Additional
Cabinets – First Row
b
a

Figure 54: Locking Two Modules

© NEC Corporation 2019
D
B
C
c
44